Simple Harmonic Motion of an earthquake

AI Thread Summary
The discussion revolves around calculating the vertical displacement of a car's suspension during an earthquake, considering the combined mass of the car and four passengers. The frequency of the earthquake is given as 1.60 Hz, leading to resonance conditions that affect the car's oscillation. Key equations related to simple harmonic motion, including those for period, spring constant, and displacement, are utilized to derive the solution. The final calculation indicates that the suspension lifts the car's body by approximately 0.078 meters as the passengers exit. The collaborative effort highlights the importance of correctly applying physics principles to solve real-world problems.
veloix
Messages
46
Reaction score
0
[SOLVED] Simple Harmonic Motion

Homework Statement



Four people, each with mass of 71.1 kg, are in a car with a mass of 1180 kg. An earthquake strikes. The vertical oscillations of the ground surface make the car bounce up and down on its suspension springs, but the driver manages to pull of the road and stop. When the frequency of the shaking is 1.60 Hz, the car exhibits a maximum amplitude of vibration. The earthquake ends and the four people leave the car as fast as they can. By what distance does the car's undamaged suspension lift the car's body as the people get out?

Homework Equations



x=Acos(wt+phi)
T=1/f
w=sqrt(k/m)
T=2pi/w
or 2pisqrt(k/m)
k= 4pi^2m/T^2

The Attempt at a Solution



I have notice that mass must be all added to together to give a total mass of 1446.4 kg. Then I found the period by T= 1/f=1/1.60=0.625s or is it T= 2pi/w= 2pi/1.60=3.93s, ^anyway from that i used K=4pi^2m/T^2 to come up with k constant k=4pi^2(1446.4)/(0.625)^2= 147999 n/m , i don't know soemthing tells me I am not doing this right i don't how i could go about getting the postion. can someone help me out?
 
Physics news on Phys.org
(w means omega.)

When the driving frequency was f=1.6 Hz, there was resonance, which means w^2= k/m => (2*pi*f)^2 = k/M, where M = mass of car+men.

delta_F = k*delta_x => Mg - weight of men = delta_x, which is what you want.
 
hmm some calculations i did from this were w^2=k/m (2*pi*1.6)^2=k/1464.4= 147992.264 K= 101.06*1464.4= 147992.264 n/m ok now i tired your equation delta_F=k*delta_x=> Mg-weight of men= delta_x so (1464.4)(9.80)-(71.1*4)= delta x= 14066.72 this was wrong. I also notice what happen to k?
 
What happened to k was a typo: it should be k*delta_x.

Let's go through the logic once more. The natural frequency of the loaded car must be f =1.6 Hz. That gives us
(2*pi*f)^2 = k/(M+m), where m is the sum of the masses of the four men.

Suppose x1 is the compression when the load is M+m, and x2 when load is M. Then,
(M+m)g – mg = k(x2-x1) => Mg = k*delta_x => delta_x = Mg/[(M+m)(2*pi*f)^2].

(In my last post, I wrote (Mg - wt of men) by mistake.)

I get delta_x as 0.078 m.
 
Last edited:
thanks man that was right. i got same thing :). I appreicate the help.
 
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Thread 'Correct statement about a reservoir with an outlet pipe'
The answer to this question is statements (ii) and (iv) are correct. (i) This is FALSE because the speed of water in the tap is greater than speed at the water surface (ii) I don't even understand this statement. What does the "seal" part have to do with water flowing out? Won't the water still flow out through the tap until the tank is empty whether the reservoir is sealed or not? (iii) In my opinion, this statement would be correct. Increasing the gravitational potential energy of the...
Back
Top