What are the important subjects for GATE mechanical?

  • Thread starter Thread starter virat
  • Start date Start date
  • Tags Tags
    Gate Mechanical
AI Thread Summary
Key subjects for the Graduate Aptitude Test in Engineering (GATE) for mechanical engineering include Production Technology, Engineering Mathematics, and General Aptitude, which carry significant weight in scoring. Other important topics are Industrial Engineering, Fluid Mechanics, Strength of Materials (SOM), Thermodynamics, and Machine Design, each contributing varying marks to the overall exam. Understanding these subjects is crucial for effective preparation and success in GATE. The discussion emphasizes the importance of practical application and iterative testing in engineering to grasp these concepts fully. Mastery of these subjects is essential for aspiring mechanical engineers aiming to excel in GATE.
virat
Messages
2
Reaction score
0
what are the important subjects for GATE mechanical...?:confused:
 
Engineering news on Phys.org
What exactly do you mean by GATE ?

My general answer is to challenge you to make a GATE, test it to failure, then identify the mode of failure. If it does not fail, build another GATE on a lower budget and break that by using it under normal operating conditions. Continue that process until you cannot reduce the cost and you will know the important subjects. A good engineer will do it all in her head.
 
Baluncore said:
What exactly do you mean by GATE ?

Graduate Aptitude Test in Engineering, I expect.
 
ha yes, i am saying about Graduate Aptitude Test in Engineering.
 
Hi Virat,
From GATE perspective I am writing the subjects as per their average weightage
1:Production Technology.(18-20 Marks)
2:Engineering Mathematics.(12-15 Marks)
3:General Aptitude (15 Marks)
4:Industrial Engineering and operations research (8-9Marks)
5:Fluid Mechanics(8-9Marks)
6:SOM (8-10Marks)
5:Thermodynamics,RAC(12-14 Marks)
6:Machine Design(5-6 Marks)
7:Engineering Mechanics (3-4 Marks)
8:Theory of machines (8-10 Marks)
9:HMT (6-7 Marks)
 

Thread 'Race car suspension Class'

Posted June 2024 - 15 years after starting this class. I have learned a whole lot. To get to the short course on making your stock car, late model, hobby stock E-mod handle, look at the index below. Read all posts on Roll Center, Jacking effect and Why does car drive straight to the wall when I gas it? Also read You really have two race cars. This will cover 90% of problems you have. Simply put, the car pushes going in and is loose coming out. You do not have enuff downforce on the right...
View full post »

Thread 'Cantilever help'

I'm trying to decide what size and type of galvanized steel I need for 2 cantilever extensions. The cantilever is 5 ft. The space between the two cantilever arms is a 17 ft Gap the center 7 ft of the 17 ft Gap we'll need to Bear approximately 17,000 lb spread evenly from the front of the cantilever to the back of the cantilever over 5 ft. I will put support beams across these cantilever arms to support the load evenly
View full post »
Thread 'What's the most likely cause for this carbon seal crack?'

Thread 'What's the most likely cause for this carbon seal crack?'

We have a molded carbon graphite seal that is used in an inline axial piston, variable displacement hydraulic pump. One of our customers reported that, when using the “A” parts in the past, they only needed to replace them due to normal wear. However, after switching to our parts, the replacement cycle seems to be much shorter due to “broken” or “cracked” failures. This issue was identified after hydraulic fluid leakage was observed. According to their records, the same problem has occurred...
View full post »

Similar threads

Struggling to design a mechanism for a tri-folding gate
Replies
21
Views
2K
Help solving garden gate statics problem
Replies
9
Views
2K
Design Wooden Gate & Hinges for Durability & Wind Resistance
Replies
10
Views
2K
Linear Actuator Sizing for Angular Force (BMX starting gate)
Replies
9
Views
3K
What is the meaning of the arrow symbol on this gate valve schematic?
Replies
2
Views
2K
Does this gate construction look okay to you?
Replies
13
Views
2K
Flow discharge between 2 open water bodies connected by a concrete sluice
Replies
2
Views
1K
Same RF signal to both gates of MOSFET --> Better linearity?
Replies
1
Views
979
How far will the bottom gate of a reservoir open?
2
Replies
56
Views
3K
Force to Close/slam a steel door gate
Replies
1
Views
2K

Hot Threads

Recent Insights

Back
Top