What is the Average Force on Each Foot During a Jump?

AI Thread Summary
The discussion revolves around calculating the average force on each foot during a jump, specifically for an 80 kg individual jumping from a height of 1 meter. The initial calculations suggest a force of 1278 N per foot, but the expected answer is 2200 N. Key equations used include the net force equation and kinematic equations to determine the change in velocity. A participant points out that the change in velocity should account for the rebound, implying a need to double the final velocity to achieve the same height. The conversation highlights the importance of correctly applying physics principles to arrive at the expected force values.
prophecygirl
Messages
2
Reaction score
0

Homework Statement



This is an MCAT practice problem that is driving me crazy! The answer is supposed to be 2200N on each foot. Any help would be much appreciated! Thanks in advance!

A guy, whose mass is 80 kg, jumps off a bench that is 1 meter off the ground. Immediately after landing on the ground with both feet, he jumps 1 meter up into the air. What is the average force on his left foot if the time of contact with the ground is 0.2 seconds?

Homework Equations



vf^2 = vi^2 + 2ad

Fnet = m(vf-vi)/time

The Attempt at a Solution



Fnet = Fground - Fgravity
Fgravity = mg

Fground = Fnet + mg

Need to find change in velocity:

vf (at top of jump) = 0 m/s
d = 1m (with downward chosen as positive direction)
a = g = 9.8 m/s^2

vf^2 = vi^2 + 2ad
vi^2 = -2ad = -(2)(9.8 m/s^2)(1 m)
vi = -4.43 m/s = 4.43 m/s upward

Plugging into impulse equation:

Fnet = m(vf-vi)/time
Fnet = (80 kg) (4.43 m/s)/0.2 s = 1772 N

Fground = Fnet + mg = 1772 N + (80 kg)(9.8 m/s^2) = 2556 N

If the total Fground is 2556 N, the Fground on each foot is 2256 N/2 = 1278 N.

As mentioned above, the answer is supposed to be 2200 N on each foot.
 
Physics news on Phys.org
Welcome to PF.

Isn't the change in velocity 2*Vf?

Doesn't he have to rebound with the same velocity to achieve the same height again?
 
Yes, of course, that makes perfect sense! Thanks so much!
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'Calculation of Tensile Forces in Piston-Type Water-Lifting Devices at Elevated Locations'
Figure 1 Overall Structure Diagram Figure 2: Top view of the piston when it is cylindrical A circular opening is created at a height of 5 meters above the water surface. Inside this opening is a sleeve-type piston with a cross-sectional area of 1 square meter. The piston is pulled to the right at a constant speed. The pulling force is(Figure 2): F = ρshg = 1000 × 1 × 5 × 10 = 50,000 N. Figure 3: Modifying the structure to incorporate a fixed internal piston When I modify the piston...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top