Comsol Definition and 175 Threads

Hello everyone, I am beginner to comsol physics.I am trying to simulate a task which contains implemented lift force of water on a solid structure(nickel). I need to know where to start from? Which modules should i use and which steps should i take? I looked up an example from comsol...

I've just got a quick question that hopefully someone can answer. My question is - why does the membrane in COMSOL vibrate without you telling it to? Here are some specifics if required... In COMSOL here are my setup details: - Physics: (3D) Structural mechanics - Membrane Study...

hello everyone is anybody here using comsol multiphysics? i'm trying to model a tube which the inlet is a fully developed fluid but the problem is how to enter a parabolic inlet profile for velocity in 2d axisymmetric it is very simple. but my model is 3d i've entered "r" as a variable in...

Hi all, The plastic flow rule for large strains in a continuum medium can be written as : -\dfrac{1}{2} \Big ( \dfrac{d}{dt}(F_p^{-1} ). ^t F_p^{-1} + F_p^{-1} . ^t \dfrac{d}{dt} ( F_p^{-1} ) \Big)= \lambda F^{-1} \dfrac{\partial f}{\partial \tau} F F_p^{-1} . ^t F_p^{-1} where F_p is the...

Hello everyone! I am simulating a distributed Bragg grating filter using comsol. The mesh i used is like wavelength/index/8, but i do not get symmetric spectrum to Bragg wavelength.Layers are λ/4 width. Is there a special meshing for these Bragg layers? Or is there someone who can give me...

Hello, I would like to simulate a beam of light that is incident on a sphere with a refractive index and you get the total internal reflection, I would like to use ray tracing in COMSOL 4.3a. you have any advice on this? thanks

Hi i am simulating Heat transfer through bimetal that is builded by SiO2 on one side and Aluminium on other side. But when i apply heat source on one side(Aluminium side)the heat do not get transferred to the other side(SiO2 side) through the interface. Only Aluminium side is showing temperature...

Good Evening , i am post graduate student of Thermal Engineering.I have some experience to COMSOL software(but not expert atleast). So now i am doing a project on Modelling a Micro thermal energy harvestor. The problem goes something like this , there is strip made up of bimetal ( material of...

Hello people, i need help with frequency domain study in electric current shell modul. I have one IDC and i have electrodes from gold, and i don't know what should i do to see my frequency response on diagramm? Does anyone has any idea?

I have been asking for years how to fix the virtual memory issue in COMSOL. I have 32Gb of memory, and it will use more virtual memory than RAM when there are at least 25Gb of RAM unused. Does anyone have a fix for this? I'm using 64 bit COMSOL

I don't have access to Comsol 4.x. I imported a 3D mesh generated from point cloud data and generated a geometry. (A hollow almost-ellipsoid.) I solve my system on the surface/boundary alone; there is no volumetric data. I need to extract 1D data from the surface/boundary at points other...

I need some help!My problem is a problem of moving boundary with loss of mass... I started to use COMSOL and I need to simulate one plate with a hole on the center. And this hole is increasing with the time according to one equation (like a velocity, in m/s) which depend of the stress. Someone...

Hi everyone, I'm trying to design a simple model by using Comsol Multiphysics. I set an inlet concentration of a species "cp" that will be adsorbed to a circular surface located at the center of the microfluidic cell (I named the concentration of adsorbed protein "cpl" ). I used laminar flow...

Hi friends. I am so new with Comsol software to design something but I wonder, if it is possible to desing a bending magnet (dipole) and simulate the motions of electrons ? I really would like to do this. Please give me a hand,help me to handle and try to do one together. Best.

Comsol grant? Hey PF, I'm a grad student and I have an idea, which I would like to explore using COMSOL. Unfortunately, this software appears to be prohibitively expensive. Does anyone know of any grant/scholarship opportunities available that I might apply for, or perhaps where to look? My...

hello guys I want to simulate the temperature distribution in and out the tube with flowing gas. As a beginner of COMSOL, i just know how to construct a simple laminar flow model. But I have no ideal about how to add a heat souce and how to get the distribution of temperature. wish...

Hi, I am new in comsol. I currently doing a simulation on rotating propeller. I need to obtain vibration magnitude of the rotating prop.. can anyone tell me which type of analysis and how i can get the data? I have been working on this and search over the google for past two week didnt...

I'm using COMSOL 4.0a. Whenever I apply a free tetrahedral mesh, I can see it on the structure immediately. However, now I need to use a moving mesh to combine the results of structure deflection and fluid flow. I cannot get the solver to compute without errors. Am I supposed to immediately...

hi friends i have a question about the physics of the comsol How can i simulate the tunelling current in comsol i mean which physics should i use i'm using COMSOL 4.2 please help me

Hi guys, i simply don't know how to start tis thing with... please help... P/S : pls find the attached.

I'm using comsol 4 for plasma modeling but I've read that this module is just for low temperature plasma, does anybody knows the temperature limitation of the plasma in this module? I mean how much is the upper limitation of plasma temperature?

Hello I am trying to validate my model by comparing a simple axisymetric 2D impacting flow of air on a surface. The geometry is simple: a cylindrical (diameter d=26.5e-3[m]) jet of air (debit Speed Ud=13.46[m/s]) is impacting a surface at distance H=0.2833[m]. Flow temp is Tj=20°C Wall...

So I feel like this should be a simpler problem than most with COMSOL... I have a simple cantilever (anchored at one end) with a force at some point source which is making it vibrate at some frequency. This is a macroscopic cantilever, so you can ignore viscosity (and most of the other Navier...

I need to develop a simple model in Comsol, but I have no experience with it. I need to see what the convective currents and velocity fields are at certain temperatures in a glass optical fiber. I have the information about the fiber and its dimensions. The fiber is going to be at around its...

Homework Statement hi there, I'm working on an annealing furnace. ingots are warmed up in the oven. I'm doing this with a finite elements method called Comsol Multiphysics. This is a pretty complex software program. Can someone please help me with this part of ComsolHomework Equations it is...

Hi! I started to look into freq response analysis of a cantilever beam using COMSOL. Luckily COMSOL already has an example model "Model Library>> Structural mechanics module>>Dynamics and Vibrations>>rotating blade". While not changing anything in the model and with Omega=0 and Cloris =0, I get...

Hi, I am trying to create two coils with different axes on Comsol Multiphysics 3.5. I use the 2D axisymetric mode but it allows to create only coils with the same axe. Can somebody help me ? Thanks in advance.

Hello everyone! I'm a new entry in thi forum and I need some help with Comsol multiphysics. I'm creating a model of tsunami waves propagation in a defined domain using the PDE interface. I ve not problems in stationary case, but when I try in time dependent case Comsol give me the error...

Hi, I want to couple two different modules of COMSOL. For example u is the solution of Module 1 and I want to give 0.95*u+a as subdomain settings parameter in module 2. Here a is a vector. I have succeeded with u and 0.95*u to use as subdomain settings parameter of module 2 but when I add a ...

Hi everyone, I'm working on COMSOL's ac-dc module and I'm trying to find the magnetic field which is created by an electrode pair (dipole). The working environment of the pair has nonzero conductivity and relative permittivity. I first found the current density between the electrodes in...

Hi all, I'm trying to run an eigenfrequency analysis on COMSOL. I have the geometry (a simple square plate fixed in one side), the material (aluminium alloy 1050) and the mesh. However, when I run the solver, I find the famous error 6250. What, exactly does that mean? Thanks in...

Hello, I am having some problems with COMSOL multiphysics 3.5a. I am using 2D weakly compressible flow with general heat transfer and am trying to model a natural convection loop. The Approach I have taken is to use properties of the material for a certain range of temperatures to...

Hello ! I am using Comsol Multiphysics in order to simulate the eddy currents in a damaged/cracked steel circular rod, with a helix coil surrounded it and thus creating the alternativ magnetic field. Actually, I am having a lot of problem in modelling it, mainly because I am new in using...

Hallo, i'm trying to implement a comsol simulation of a impedance spectroscopy experiment. But unfortunatly I'm an absolut beginner in Comsol and i have many problems with this work. First of all i want to say that I'm using the AC/DC module, more precisely the transient analysis. At the...

Hi all - I would like to add a periodic inlet flow rate (Q(t) over an entire period T) as a BC in COMSOL. Does anyone know how to do this in 2D axisymmetric Transient Navier Stokes through COMSOL? I'm aware of the periodic boundary condition option available, but really just don't know how to...

Greetings. I'm new to COMSOL and am in the stage where I know what I want done, but I just can't get the software to do it. Suppose I model out a metal spring, and fix one end of it in place. I want to pull on the other end, and then plot some value relevant to the deformation of the...

I'm running out of memory on my model help! 3D not axisymmetric! Pictures of geometry and mesh attached. Any recommendations on how to make this possible? This is volumetric flow through a cylinder with a thin membrane attached that is porous and utilizes brinkman's equations.

Hey all, I am try to model a problem in which one fluid (of known properties) sits on top of another fluid (with different properties) and there is an imposed slip boundary condition at the interface. I'm wondering if COMSOL has a Slip boundary condition that can be readily used or if...

Hello all, I have a small problem with COMSOL. I am trying to use the particle tracing feature, more precisely I want to use the boundary coordinates to specify where are the points from which to trace the electrons. From what I understand in the User's Giude, the Boundary Coordinates feature...

Hello everyone, I am trying to understand COMSOL 3.5 and I am interested in Photonic crystal fibres and tapered optical fibres. First of all, could you please tell me what is the background of the layout? When you create a design/object, the rest area is air or I need to define another object as...

Hello All, I have a fundamental Comsol question that maybe you can help me with. If I am in say a 2-D In-Plane TE Mode. I am inputting a wave that will propagate left to right. What is the best way solve for the resulting field that is transmitted to the right boundary, regardless of what...

i want to import a designed geometry to ansys or comsol from proengineer but i can't. (ProE Filetype:*.prt) in ansys: it gets no error but continues processing and becomes not responding... in comsol: it says" Internal error translating CAD model Output file could not be saved"...

Hi all - I have a problem that I'm probably going to model in COMSOL and would love to hear some ideas on how to get the proper BCs. Attached is the picture from Truskey. Essentially, the problem consists of removing waste (water) from the membrane tube at a rate of ~ 1 mL/min with a pressure...

Hello, I wish to model with Comsol a simple situation: a plasterboard undergoes locally with one 3 ms duration a very short flash (Dirac) and I would like to see the evolution during the time of the wave of heat through volume. The problem it is that I do not know how to enter a function...

Hello! thanks in advance for any help you can throw my way! I am in my masters year of an Acoustical Engineering course in the UK. We have been set a group design project to with essentially setting up a forced convection cycle in a room in order to redistribute the heat from a radiator and...

Hello, I would be grateful if someone could comment on my problem. I am trying to simulate diffraction of optical wavelength on a sub-wavelength aperture (aperture diameter/wavelength < 0.1). What I want to achieve is: - simulate a geometrical model with an aperture of 15um diameter -...

Hi everyone. I am starting using Comsol modeling the temperature field of a buried cable installed into a PVC duct (2D problem). I have already solved the problem considering heat transfer by conduction. To do this, I have used the Electro-Thermal Interaction Application Mode (Perpendicular...

Hi all - I've been working on some code in Comsol w/ Matlab that works fine on any machine I run it on - so long as I run it through the Comsol w/ Matlab GUI. No matter which machine I run it on, the program fails if I run Comsol w/ Matlab through a CLI. Specifically, the geominport()...

Hello, I'm a 2nd year student, and I'm trying to get to know COMSOL. I'm starting off by solving simple problems with the incompressible Navier-Stokes model, but I keep having trouble with the convegence of the solution. I keep getting the following error: "Failed to find a solution: The...

Hello, I've been attempting to learn how to use COMSOL and ANSYS to create and model a simple solenoid (iron core, 1000 turns of 26 AWG Cu wire, 1 Amp, 0 Hz etc), ever since I realized my Department always had a license to both packages :rolleyes:. I've done this using FEMM, and fairly...