Calculate the Current, Lost Volt and P.d across parallel resistors?

AI Thread Summary
The discussion revolves around calculating current, lost volt, and potential difference across parallel resistors. The user successfully calculated the current as 1.5A and the lost volt as approximately 2.0V. There is confusion regarding the term "lost volt," which is clarified as the voltage drop due to internal resistance in the battery. For the potential difference, the user determined it to be 7V across the parallel resistors. Overall, the conversation emphasizes understanding the concepts of voltage and resistance in parallel circuits.
looi76
Messages
80
Reaction score
0

Homework Statement


http://img508.imageshack.us/img508/9121/10052008ei3.png
(a) Calculate the Current across parallel resistors.
(b) Calculate the lost volt across parallel resistors.
(c) Calculate the potential difference across parallel resistors.

Homework Equations


I = \frac{V}{R}

Lost \ Volt = Ir

V = IR

The Attempt at a Solution


(a) 1.5A (I just added the currents of the parallel resistors.)

(b) Lost \ Volt = Ir

= 1.3 \times 1.5

= 1.95V

= 2.0V

(c) Need Help in solving it...

Thnx in advance
 
Last edited by a moderator:
Physics news on Phys.org
What exactly does "lost volt" refer to?

For (c), recall what is the expression for voltage across a resistor. Also try to recall what so special about the potential difference across parallen circuit components. Then just plug in the numbers and you're done.
 
That the problem, I don't really know what Lost Volt is?!

(c) V_1 = IR = 1.17 \times 6 = 7V

V_2 = IR = 0.33 \times 21 = 7V

So, the voltage across the parallel resistors is 7V ?
 
Yes, that should be it. Anyway, I have no idea what "lost volt" refers to. Maybe you could ask your teacher who set the question.
 
I'm pretty sure the lost volt is the resistance inside the battery. Once you work out the lost volt you can minus that from the voltage of the battery and work out the real value of V. Most questions don't include thw lost volt because it is quite small and considered negible. I think they are probably just making you aware of it and know hoe=w to calculate it.
 
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
Back
Top