How do I know if the image is real or virtual?

AI Thread Summary
To determine if an image is real or virtual, it's essential to analyze the object's position relative to the focal length of the lens. A real image is formed when the object is outside the focal length, while a virtual image occurs when the object is within the focal length. The magnification equation m = - (v/u) can help identify the nature of the image based on its size compared to the object. Diagrams can clarify the relationship between object distance, image distance, and the lens's focal length. Understanding these principles is crucial for accurately identifying image types in optical systems.
izMuted
Messages
4
Reaction score
1

Homework Statement


ae476d4f6593d54e328badcc49f9ecd0.png

I know that the object distance is 15 using the equation m = - (v/u)
(+ or - depending on real / virtual) 2 = (+ or -) 30/u
u = 15

However how do I know if the image is real or virtual?

Homework Equations


m = - (v/u)

The Attempt at a Solution

 
Physics news on Phys.org
Have you tried drawing the diagram, something like this:
u14l5c1.gif


Where would the image have to be to be bigger than the object?

Which side is known as the real side, which side is known as the virtual side and why?
 
How do I draw the diagram when I don't know if the object is within / outside the focal length?
Also I used to think that because the image is bigger it must be virtual, however there are some diagrams on the internet where the image is bigger and the object is outside the focal length, like here:
u14l5da6.gif
 
"the lens is used as a magnifying glass"- usually when using a magnifying glass is the image virtual or real?
 
  • Like
Likes izMuted
As far as I know, in a converging lens, only when the object is between the optical centre and the focal length that the image is virtual (i.e. the setting used in a magnifying glass).
 
  • Like
Likes izMuted
Ah yeah the magnifying glass part makes sense - thanks for explaining
 
  • Like
Likes Sarahborg
Thread 'Struggling to make relation between elastic force and height'
Hello guys this is what I tried so far. I used the UTS to calculate the force it needs when the rope tears. My idea was to make a relationship/ function that would give me the force depending on height. Yeah i couldnt find a way to solve it. I also thought about how I could use hooks law (how it was given to me in my script) with the thought of instead of having two part of a rope id have one singular rope from the middle to the top where I could find the difference in height. But the...
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Back
Top