Integral of Acceleration with respect to time

AI Thread Summary
Acceleration is defined as the second derivative of position with respect to time, expressed as a = d²x/dt². To derive the position function x(t), one must assume constant acceleration and perform two integrations: first integrating acceleration to find velocity, and then integrating velocity to find position. The resulting equation for position is x(t) = 0.5at² + v₀t + x₀, where v₀ and x₀ represent the initial velocity and position, respectively. The discussion emphasizes the importance of understanding the relationship between acceleration, velocity, and position in kinematics. Overall, the integration process clarifies how these variables are interconnected.
Ross Nichols
Messages
2
Reaction score
0

Homework Statement


Acceleration is defined as the second derivative of position with respect to time: a = d2x/dt2. Integrate this equation with respect to time to show that position can be expressed as x(t) = 0.5at2+v0t+x0, where v0 and x0 are the initial position and velocity (i.e., the position and velocity at t=0).

Homework Equations


a = d2x/dt2

x(t) = 0.5at2+v0t+x0

The Attempt at a Solution


Hi everyone, thank you for the help. I am struggling with this one as I don't exactly know how to start. After doing some research online, it seems that

d2x/dt2 is equal to vdv/dx, which can help towards solving the problem, but I don't understand why these are equal, or what was done to get there. Thank you for the help.
 
Physics news on Phys.org
First off, you must assume that the acceleration is constant. Using a = dv/dt, do a first integral to find v(t). Then integrate again to find x(t).
 
  • Like
Likes Ross Nichols
kuruman said:
First off, you must assume that the acceleration is constant. Using a = dv/dt, do a first integral to find v(t). Then integrate again to find x(t).
Thank you, I think I was overcomplicating the problem in my head and you were able to pull my thoughts down to earth. Here is what I got:

v = Antiderivative(a)
v(t) = at + C
When t=0, C = v0
So: v(t) = at + v0
Next, the second integral:
x(t) = antiderivative(at + v0)
x(t) = 0.5at2 +v0t + C
When t = 0, C = x0
Resulting with: x(t) = 0.5at2 +v0t + x0

Thank you for the help.
 
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Thread 'Correct statement about a reservoir with an outlet pipe'
The answer to this question is statements (ii) and (iv) are correct. (i) This is FALSE because the speed of water in the tap is greater than speed at the water surface (ii) I don't even understand this statement. What does the "seal" part have to do with water flowing out? Won't the water still flow out through the tap until the tank is empty whether the reservoir is sealed or not? (iii) In my opinion, this statement would be correct. Increasing the gravitational potential energy of the...
Back
Top