Projectile Motion Unusual Problem

AI Thread Summary
A body thrown upward at an angle θ passes through two points at the same height h at times t1 and t2. The challenge is to calculate the initial velocity v0 and height h using projectile motion equations. The discussion highlights that since the heights at t1 and t2 are equal, two equations can be formed to solve for v0 in terms of the known variables. It is suggested to consider the vertical launch speed required to maintain the object's flight duration between t1 and t2. The conversation emphasizes the importance of selecting the appropriate equations for solving constant acceleration problems.
Georgiana.B
Messages
2
Reaction score
0

Homework Statement


A body which is thrown upward from the ground at an angle θ passes through 2 points situated at height h at times [t][1] and [t][2] from launching.Calculate the initial velocity [v][0] and the height h.

Homework Equations


The equation of motion for a projectile motion:
x(t)= [x][0]+ [V][0](t-[t][0])- g/2[(t-[t][0])][2]
V=[V][x] * cosθ +[V][y] * sinθ

The Attempt at a Solution


I thought that since the body passes through the 2 points which are situated at the same height at time [t][1] and [t][2], at means that y([t][1])=y ([t][2]). So, by replacing it in the formula above mentioned with [V][y] * sinθ as [V][0], i tried to get [V][0] with respect to time,but that doesn't seem to help since i have no numbers to relay on.Could anyone please share any ideas of solving?
 
Last edited:
Physics news on Phys.org
Georgiana.B said:

Homework Statement


A body which is thrown upward from the ground at an angle θ passes through 2 points situated at height h at times [t][1] and [t][2] from launching.Calculate the initial velocity [v][0] and the height h.


Homework Equations


The equation of motion for a projectile motion:
x(t)= [x][0]+ [V][0](t-[t][0])- g/2[(t-[t][0])][2]
V=[V][x] * cosθ +[V][y] * sinθ

The Attempt at a Solution


I thought that since the body passes through the 2 points which are situated at the same height at time [t][1] and [t][2], at means that y([t][1])=y ([t][2]). So, by replacing it in the formula above mentioned with [V][y] * sinθ as [V][0], i tried to get a express [V][0] with respect to time,but that doesn't seem to help since i have no numbers to relay on.Could anyone please share any ideas of solving?

Hi Georgiana.B, Welcome to Physics Forums.

If you have the general equation of motion for the y-direction and two solution pairs [h,t1] and [h,t2], then you can write two equations involving all the given variables. See if you can't then solve for Vo in terms of the given variables. You should be able to eliminate h from the Vo solution, too :wink:

Note that your solution will involve variables t1, t2, θ, and constant g.
 
Georgiana.B said:
y([t][1])=y ([t][2]). So, by replacing it in the formula above mentioned with [V][y] * sinθ as [V][0], i tried to get a express [V][0] with respect to time,but that doesn't seem to help since i have no numbers to relay on.
You know more than merely the two heights are the same. You know that height equals h. Your answer will be in terms of h.
 
A better question would be,which are other ways of solving this kind of problems?
 
Georgiana.B said:
A better question would be,which are other ways of solving this kind of problems?
Depends what you mean by 'this kind of problem'. If you mean constant acceleration problems then the SUVAT equations, such as you quoted, are the natural choice. The trick, often is to pick the most useful for the question. Of the usual five variables - distance, acceleration, time, start velocity, end velocity - each equation references four. Typically you know three and want a fourth, which tells you which equation to use.
In some problems there can be a quicker way, perhaps using symmetry.
In the present problem, you could start by finding the vertical launch speed needed to keep an object in the air for time t2-t1. From that, you can easily find the vertical speed needed when launched from h lower down.
 
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Thread 'Correct statement about a reservoir with an outlet pipe'
The answer to this question is statements (ii) and (iv) are correct. (i) This is FALSE because the speed of water in the tap is greater than speed at the water surface (ii) I don't even understand this statement. What does the "seal" part have to do with water flowing out? Won't the water still flow out through the tap until the tank is empty whether the reservoir is sealed or not? (iii) In my opinion, this statement would be correct. Increasing the gravitational potential energy of the...
Back
Top