Solve Propeller Problem: Average & Instantaneous Power Output

  • Thread starter Thread starter Kenchin
  • Start date Start date
  • Tags Tags
    Propeller
AI Thread Summary
The discussion focuses on calculating the average and instantaneous power output of an airplane propeller driven by a constant torque of 1590 Nm. The average power output can be determined using the formula P_avg = ΔE/Δt, where ΔE is the work done over the first 5 revolutions. The user initially struggled with unit conversions and method application but later clarified that energy is calculated as torque multiplied by angle. For instantaneous power, the correct approach involves using P = τω, where ω is the angular velocity at that moment. The conversation emphasizes the importance of correctly applying formulas and unit consistency in solving physics problems.
Kenchin
Messages
4
Reaction score
0
An airplane propeller is 2.08 m in length (from tip to tip) and has a mass of 117 kg. When the airplane's engine is first started, it applies a constant torque of 1590Nm to the propeller, which starts from rest.

Question I:
What is the average power output of the engine during the first 5.00 rev?

Question II:
What is the instantaneous power output of the motor at the instant that the propeller has turned through 5.00 rev?


I've already solved for the angular accelleration (after 5 revolutions) which is alpha, angular speed omega (after 5 revolutions), and work after 5 revolutions W, moment of inertia 42.18kg*m^2.

For the last two parts I've tried to solve using P=torque+angular velocity ... that turned out to be wrong. Then I tried using P=Change in work/change in time but that failed. So now I'm a little at a loss. Is there any suggestions where to try next?:cool:

I figured it out, my methods were correct... my ending units were wrong! @_@
 
Last edited:
Physics news on Phys.org
Kenchin said:
An airplane propeller is 2.08 m in length (from tip to tip) and has a mass of 117 kg. When the airplane's engine is first started, it applies a constant torque of 1590Nm to the propeller, which starts from rest.

Question I:
What is the average power output of the engine during the first 5.00 rev?

Question II:
What is the instantaneous power output of the motor at the instant that the propeller has turned through 5.00 rev?I've already solved for the angular accelleration (after 5 revolutions) which is alpha, angular speed omega (after 5 revolutions), and work after 5 revolutions W, moment of inertia 42.18kg*m^2.

For the last two parts I've tried to solve using P=torque+angular velocity ... that turned out to be wrong. Then I tried using P=Change in work/change in time but that failed. So now I'm a little at a loss. Is there any suggestions where to try next?:cool:

I figured it out, my methods were correct... my ending units were wrong! @_@
Energy is torque x angle (force x distance).

\tau\Delta\theta = \text{Work}

So P_{avg} = \Delta E/\Delta t = \tau\Delta\theta/\Delta t

All you have to do is figure out how long it takes to move the propeller 5 revolutions with that torque: Use \theta = \frac{1}{2}\alpha t^2 and \alpha = \tau/I to find the time in terms of angle and torque (and I).

To find instantaneous power, use:

P = \tau\omega = \tau\alpha\Delta t

You have to assume that in the first 5 revolutions, the resistance to motion is only the moment of inertia of the propeller, not the propulsion of air by the propeller.

AM
 
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Thread 'Variable mass system : water sprayed into a moving container'
Starting with the mass considerations #m(t)# is mass of water #M_{c}# mass of container and #M(t)# mass of total system $$M(t) = M_{C} + m(t)$$ $$\Rightarrow \frac{dM(t)}{dt} = \frac{dm(t)}{dt}$$ $$P_i = Mv + u \, dm$$ $$P_f = (M + dm)(v + dv)$$ $$\Delta P = M \, dv + (v - u) \, dm$$ $$F = \frac{dP}{dt} = M \frac{dv}{dt} + (v - u) \frac{dm}{dt}$$ $$F = u \frac{dm}{dt} = \rho A u^2$$ from conservation of momentum , the cannon recoils with the same force which it applies. $$\quad \frac{dm}{dt}...
Back
Top