What is the percentage uncertainty in V when L1-L2 is 30?

AI Thread Summary
The discussion revolves around calculating the percentage uncertainty in the variable V, defined as V = (1/(L1-L2))^0.5, given that L1-L2 equals 30 with uncertainties of +/- 0.1 for both lengths. The method involves adding the uncertainties to get +/- 0.2, then calculating the percentage uncertainty as (0.2/30) * 100%, and adjusting for the square root by multiplying by 0.5. Participants confirm that this approach is correct, although one raises a question about the representation of the difference as 30.0 due to the uncertainty. Overall, the calculations and reasoning presented are validated, with some discussion on the notation of the final value.
Rohan1997
Messages
27
Reaction score
0

Homework Statement


My homework question says: the uncertainty in length 1 is +/- 0.1 and in length 2 is +/- 0.1 : calculate the percentage uncertainty in V where V

L1-L2 is 30

Homework Equations



V= (1/(L1-L2))^0.5 where L is the length[/B]

The Attempt at a Solution



So what I did was add the two uncertainties to get +/- 0.2
I then worked out percentage uncertainty by doing 0.2/30 *100%

and then I multiplied my answer by 0.5 since it is being square rooted.

Is this correct or have I made a mistake somewhere in my method?
 
Physics news on Phys.org
If you have learned to add uncertainties linearly, then: yes (correct) and no (no mistake) :smile:
 
BvU said:
If you have learned to add uncertainties linearly, then: yes (correct) and no (no mistake) :smile:
thanks :)
 
Your welcome, but mind you: it's an opinion: there's no guarantee

And: If the uncertainty in L1 - L2 is 0.2, why isn't this difference written as 30.0 ?
 
BvU said:
Your welcome, but mind you: it's an opinion: there's no guarantee

And: If the uncertainty in L1 - L2 is 0.2, why isn't this difference written as 30.0 ?
don't know what your talking about sorry
 
Thread 'Variable mass system : water sprayed into a moving container'
Starting with the mass considerations #m(t)# is mass of water #M_{c}# mass of container and #M(t)# mass of total system $$M(t) = M_{C} + m(t)$$ $$\Rightarrow \frac{dM(t)}{dt} = \frac{dm(t)}{dt}$$ $$P_i = Mv + u \, dm$$ $$P_f = (M + dm)(v + dv)$$ $$\Delta P = M \, dv + (v - u) \, dm$$ $$F = \frac{dP}{dt} = M \frac{dv}{dt} + (v - u) \frac{dm}{dt}$$ $$F = u \frac{dm}{dt} = \rho A u^2$$ from conservation of momentum , the cannon recoils with the same force which it applies. $$\quad \frac{dm}{dt}...
I was thinking using 2 purple mattress samples, and taping them together, I do want other ideas though, the main guidelines are; Must have a volume LESS than 1600 cubic centimeters, and CAN'T exceed 25 cm in ANY direction. Must be LESS than 1 kg. NO parachutes. NO glue or Tape can touch the egg. MUST be able to take egg out in less than 1 minute. Grade A large eggs will be used.
Back
Top