Fredkin Gates are supposed to be universal. So far I've gotten AND, OR and NOT out of them but I can't figure out XOR. Any help?
I know that A XOR B = (A AND NOT B) OR (B AND NOT A), but trying to recreate that with Fredkin Gates is not very elegant... is that the only way?
Edit: I guess I...
Homework Statement
I am doing an experiment to find the difference in photosynthesis between different areas of grass.
I have and am taking more measurements. But essentially I need to convert the data I have into a flux per area over time.
the data logger records the data of CO2...
I have a question. Would it be possible to calculate the velocity of a thrill ride at any given time, given the rate of change in g-forces and the velocity of the ride at the start (or if there's a hill at the start, the velocity of the car going uphill)?
Hi,
I'm trying to build what a biologist would call a "stimulus isolator". That is, I have a voltage follower connected to a system that I want to zap with 0-100V, so that the voltage follower doesn't see the voltage (much).
I have an A/D board that can put out 0 to 5 Volts. I want this...
Homework Statement
Hi
I am converting from Cartesian co-ordinates to cylindrical co-ordinates systems and can do the conversion fine, but am unsure about how to convert the limits.
Q)
Region V is given in Cartesian by: F(x,y,z) = xi+yj+z(x^{2}+y^{2})k
Where x^{2}+y^{2} \leq 1...
Homework Statement
Convert 23.588 (the 88 is repeating) to an improper fraction.
Homework Equations
I don't have any.
The Attempt at a Solution
I'm not sure of the best way to go about this so I've taken a method that I've seen on some problems that were more simple as they...
Homework Statement
An ice cube of volume 12.1 cm3 is initially at a temperature of -18.1°C. How much heat is required to convert this ice cube into steam?
(the final answer must be in Joules)
Homework Equations
Q = m*c*deltaT
Q = m*Lf (latent heat of fusion)
Q = m*Lv (latent heat of...
Homework Statement
integrate
f(x,y) = sqrt(x^2+y^2)
over triangle with vertices (0,0) (0,sqrt2) (sqrt 2, sqrt 2)
Homework Equations
x= rcosO, y = rsinO
x^2+y^2=r^2
The Attempt at a Solution
im supposed to use a double integral converted to polar coordinates,
so i used...
Greetings,
I am trying to figure out how to convert an x,y,z coordinate to longitude and latitude (or right ascension and declination). Center of Earth is origin, of course.
Thanks
My biggest handicap in chemistry at this moment is learning to convert written chemical reactions to an equation.
Like here are some examples of questions I can't do-
Potassium nitrate is heated to produce oxygen.
I know that KNO3 --> O2 and that's about it
Calcium is placed in...
Hello people,
I have a file that contains planes in the form of norms that have lengths (magnitude not always 1). The file looks like this:
A1 B1 C1
A2 B2 C2
A3 B3 C3
...
Every A B C define the components of a norm to a plane. These sets of planes form a polyhedron. I'm...
Homework Statement
How much heat is required to convert 1.0 kg of water at 85°C to steam at 118°C?
Homework Equations
Q=mc(delta)T
Qw+Qs=0?
The Attempt at a Solution
we know the m(water)=1.0kg and c(water)=4186J/kgC and T=85C
so using Heat (Q) formula Q=mcT---...
1.They claim that it is possible to store over 500 GW of power (presumably for part of a
day) in pressurized caverns of 535 billion cubic feet. If the storage time is one half day,
what is this in Joules per cubic meter?
[b]2.Watt=J/s
GW=1x10^12 Watts
1 cubic meter = 35.31466672 cubic...
Is there anyway I can convert the attached equation into a linear relationship so that 'a' is the gradient of the straight line. 't' and 'h' are both variables. It doesn't matter exactly what the x and y values are. I just need 'a' to be the gradient of the straight line. I tried lots of...
Hello i am trying to convert the strain gauge readings i took in a lab from an I beam that was subjected to torsion. I am trying to convert the microstrain readings to stress and shear stress. I have the following information the Yield strength of the I beam and the youngs modulus but not the...
How do you get from a concentration to an effective dose? For example, if you have 10-9 Ci/cm3 of tritium in a human body, then how do you get the effective dose to that body?
Thanks
I'm not sure if this is the right place for this, but I can't seem to find how to convert cm^-1 into erg or joules... It's a pretty dumb question, but I can't find the answer anywhere.
Thanks a lot in advance!
Homework Statement
For what value(s) of 'k' will the system have (a) no solution, (b) a unique solution, and (c) infinitely many solutions?
x-2y+3z=2
x+y+z=k
2x-y+4z=k^2
Homework Equations
The Attempt at a Solution
I worked at the matrix and this is what I have so far...
Homework Statement
Are these systems of linear equations coincident planes, two parallel planes, or two planes whose intersection is a line. In the latter case, give the parametric equations for the line.
X₁+2 X₂-X₃=2
X₁+X₂+X₃=3
Homework Equations
X₁+2 X₂-X₃=2
X₁+X₂+X₃=3
The...
How do I convert mol/L to g/cm^3 , I am wanting to know this for the refrigerant R134a from which the value I have is 5.0308 mol/L and I am wanting to convert it to g/cm^3
Thanks
Homework Statement
How can you convert 212 in base-10 to base-9?
The Attempt at a Solution
There are holes in the sequence of figures when considering 212 in base-9.
There are 21 holes in the line. There also holes from 90 to 99 and from 190 to 199.
There are then 40 (= 23+10+10-1) holes in...
Hey everyone, I was wondering if you could help me with something.
Can someone give me the step to convert the two equations from general to standard form? If you could, it would be such a great help to me. Thanks
y= x^2 - 2X + 5 and y= -3x^2 + 12x -4
Evaluate by changing to cylindrical coordinates
\int from 0 to 1 \int from 0 to (1-y^2)^1/2 \int from (x^2+y^2) to (x^2+y^2)^1/2 (xyz) dzdxdy
I came to an answer of integral from 0 to pi integral from 0 to 1 integral from r^2 to r (rcos\thetarsin\thetaz) r dzdrd\theta
Is this the correct answer?
what is wrong with my code that i keep getting this error "error C2440: '=' : cannot convert from 'double' to 'double *'"
i am new to c and very weak in pointer.
#include<stdio.h>
//Function Prototypes//
int read(double pointco[][2]);
void obtainStatistics(double pointco[][2],int...
I have a super winch 12 volt LP 8500 that I want to use using an inverter from my household current. The motor is 12volt 4.5 hp 3.3 kw.
I have tried to use a battery with my battery charger but the battery does not hold enough charge without have a vehicle that has an alternator.
Is there a...
Homework Statement
Is it possible to convert ml to grams for a Heat Capacity and Specific Heat type of problem? The problems that I have done so far did not use ml at all. I am stuck with the following problem:
A piece of stainless steel (specific heat = 0.50 J g-1 oC-1 ) is taken from an...
Homework Statement
Hi, this is an Hw need to be submitted in 2 hrs !
So, anyone helps I would really apppreaitiate it >>
in this problem I am asking the user to enter some text And I wil convert it into
Morse Method, I am perfectly fin with that, But the code DOES NOT TYPE out...
I'm making a program for one of my programming classes and just needed some help!
#include <iostream>
#include <iomanip>
using namespace std;
int main()
{
int number;
float feet;
float metres;
float conv1;
float conv2;
cout << "Do you wish to convert 1...
1. Convert the following numbers to 32-bit two's complement binary numbers.
-22 , -100
Can someone explain this to me? I thought I just convert the +22, which is 10110 and add it to all the 1's. Like,
111111...10110 and positive would be 00000000...10110. But that's not how it...
could anyone help me ?
i know global position of three flag for example (10,20,30)
and i have my distance , phi and theta to flags .
could anyone helping me find my position ?
Homework Statement
Convert the following:
From butane to 2,3-dimethylpent-2-ene
Homework Equations
organic synthesis
The Attempt at a Solution
Working forwards I get:
Cl2 and light/separate yielding 1-chorobutane
Working backwards I get:
2,3-dimethylpent-2-ene converted by I-...
Homework Statement
When 2 glass plates form an air wedge with a fine wire at one end, why don't we convert the given wavelength in air of light into the wavelength in glass since we have to convert it when it is entering in water??
Thanks
Homework Equations
The Attempt at a Solution
Hi,
I have the equation of a plane P in R3.
I have an equation f(x) of a line that exists on that plane, using an arbitrary origin/axis on the plane.
I know the corresponding R3 coordinates of a point of f(x).
Intuition tells me that I have all the info I need to calculate the...
Homework Statement
I need to convert this to a polar coordinate
\vec{F} = 5xz\vec{i} + 5yz\vec{j} + 4z^3\vec{k}
Homework Equations
The Attempt at a Solution
I have no idea to do this, can someone help?
Hi
i need help with this conversion as i am unsure how to approach this.
I have obtained a force vs displacement curve from a Hounsfield materials testing machine, and would like to know how to convert this to a stress vs strain curve.
Thanks
Homework Statement
An ion of a magnesium isotope has A=24 and Z=12. Find the specific charge
Homework Equations
The Attempt at a Solution
I know that the charge of a proton in Coulombs is 1.60\times10^{-19}. From the information given, I know that I have 12 protons and 24-12=12...
I have calibration data for some 0/45 reflectance standards which is in spectral format of %R in 10nm increments. I need to check the accuracy of reflection densitometers which read Status A density (V,R,G,B).
What is the proper way to convert the spectral reflectances to density?
Thanks,
GR
Hello,
I am trying to extract the 3 angles from a unit vector to position a part on a 5 axis milling machine:
This machine has 3 linear axes (x,y,z), direct coordinate system
It has 2 rotary axes:
A turns about the x (called 'tilt')
C is carried on the A axis (called 'rotary')
See...
We are using a DAQ (data acquisition) board for our project, that has only 2 analog outputs, but we need 4. It also has some digital outputs... Is there a way to convert the digital outputs into analog, and if so, what is it?
Thanks