Materials and Chemical Engineering Forum

Post thread
Join the expert discussion on Materials and Chemical Engineering topics. Includes topics on the properties of matter and its applications. Metal Production, Fabrication, Distillation, Corrosion
Strain Hardening Coeff of FCC Materials & SFE
Replies
1
Views
1K
Equilibrium conversion of batch vs. flow reactor
Replies
4
Views
8K
Looking for Information on Electrostatic Precipitators?
Replies
1
Views
2K
Effects of Magnesium in Ductile Iron
Replies
1
Views
2K
Biodegradable Plastic: Cellulose Acetate & Checking Its Biodegradability
Replies
2
Views
2K
Flexural Bending Test: Structural Integrity of Pre-Preg Panel
Replies
1
Views
1K
What Is the Freezing Temperature of Brass Under Gradual Tension?
Replies
5
Views
17K
Thermal conductivity of water increasing with temperature
Replies
1
Views
11K
Coating that is both reflective and thermally conductive
Replies
1
Views
1K
Mathematical model for pearlite interlamellar spacing
Replies
1
Views
1K
Retained Austenite: Why, Conditions & Mechanism
Replies
1
Views
2K
High Density of Grain Boundaries in Martensite
Replies
1
Views
1K
Troubleshooting Ion Exchange Membrane Desalination with Comsol - Low Voltage Fix
Replies
4
Views
2K
Can Nafion and Eudragit form a precipitated interpolyelectrolyte complex?
Replies
1
Views
1K
The Role of Baffles in a Reactor: Increasing Mixing & Heat Exchange
Replies
4
Views
15K
E-Glass Properties: Find E, Poisson's Ratio, G
Replies
1
Views
2K
Carbon Extraction from the atmosphere
Replies
8
Views
2K
Material properties for annealing cage
Replies
9
Views
3K
Hydrogel limiting diffusion of calcium
Replies
1
Views
2K
Can Sorbothane withstand a 2000 lb load for shock absorbence?
Replies
1
Views
2K
Looking for Phase Diagrams for Mag-Thor alloys
Replies
1
Views
2K
How do gas reactions affect volume in a fixed container?
Replies
3
Views
4K
Thermal Expansion of a shrink-fit collar
Replies
1
Views
2K
What is the coldest freezer pack material that can stay soft?
Replies
5
Views
6K
Does Benzidine polymerize in presence of alcohol?
Replies
5
Views
3K
Is Compressive Strength of Concrete Inversely Proportional to Surface Area?
Replies
2
Views
2K
Question about Auto-Ignition Temperature
Replies
2
Views
2K
How Do Levenspiel Plots Determine CSTR Volume for Increasing Reaction Rates?
Replies
4
Views
5K
Moist Chlorine & Hydrogen Psychrometric or Mollier Chart
Replies
2
Views
3K
Does the type of reactor affect the rate law in a chemical reaction?
Replies
3
Views
2K
Volumetric flow rate through a pipe vented to atmosphere
Replies
2
Views
6K
Stress calculations for acrylic
Replies
1
Views
9K
Fluids with high expansion ratios that do not leave the liquid state
Replies
1
Views
2K
Deposit Indium Film on Metal Bar - Cheap Prototyping Method
Replies
5
Views
3K
Ag Composition) of 5nm Au & 10nm Ag Film After Annealing
Replies
3
Views
2K
What Are the Best Resources for Learning About Polymers?
Replies
2
Views
2K
PFR Reaction Rate: Understanding CSTR vs. PFR
Replies
3
Views
4K
PFR vs. CSTR reactor size for various order reactions
Replies
10
Views
39K
Looking for oxidizing color-changing material
Replies
5
Views
7K
Creating Superalloys: How is Cobalt-Based Alloy Produced?
Replies
2
Views
2K
Chemical Process Flow Diagram Software
Replies
4
Views
5K
Practical experience of minimum tension possible of a membrane
Replies
2
Views
2K
Electroplating copper on top of anodized aluminum
Replies
3
Views
3K
What is the significance of the change in concentration over time in a CSTR?
Replies
7
Views
9K
Creating Small Expandable Packages for Volatile Material
Replies
1
Views
2K
Calculating Velocity in a Pipe: Flow Rate 0.01, Diameter 90mm
Replies
5
Views
2K
How to Produce Super Phosphate Using Clean Compressed Air and Calcium Sulphate?
Replies
1
Views
2K
What Happens When Carbonate Ores Are Roasted and Sulphide Ores Calcinated?
Replies
1
Views
2K
Can paper be electroplated without damaging it?
Replies
33
Views
17K
Granules from fine powder: Agglomaration
Replies
3
Views
5K
Chemical engineering problems in metallurgy industry
Replies
1
Views
2K
Spheroidite vs. Pearlite: Understanding Steel Alloy Microstructures
Replies
1
Views
4K
Barium Titanate Sintered or in Polymers?
Replies
1
Views
2K
Ambient temperature of materials.
Replies
2
Views
2K
Severe Condition (85°C/95% or Water Immersion)
Replies
3
Views
3K
Help with the combustion of gas inside of a Hydocarbon ring
Replies
2
Views
2K
Why Does Cementite Color Differ in Micrographs of Steel?
Replies
1
Views
5K
What Is the Meaning of Equilibrium Solidification Temperature in Supercooling?
Replies
2
Views
2K
Grain boundary sliding in creep
Replies
2
Views
3K
Low Thermal Expansion Coefficient Glass Tube
Replies
2
Views
3K
Microfluidics: asymmetric and symmetric t-junctions
Replies
1
Views
2K
Practical question liquid nitrogen stump removal
Replies
4
Views
6K
Soft to rigid construction materials
Replies
1
Views
3K
Intermetallics and solid solution
Replies
1
Views
4K
Creating a monstrous e-cigarette prototype
Replies
6
Views
2K
Weight difference of graphene vs copper?
Replies
1
Views
3K
A question about residual stress
Replies
6
Views
3K
Wood vs Metal (Interface Material)
Replies
2
Views
3K
Hand Moldable Plastic: Find Material for Room Temp Shaping
Replies
4
Views
3K
How to increase reaction rate using EM radiation?
Replies
13
Views
3K
Double pipe heat exchanger design guide
Replies
2
Views
4K
A question on the abundance of the elements
Replies
2
Views
2K
Calculation of volume after phase change
Replies
1
Views
3K
Osmium Alloys and UV reflection
Replies
2
Views
4K
Dissociation Well water at great Depths and Retrieve Effortlessly
Replies
12
Views
3K
How the ductility of metal change when grains is decreased ?
Replies
6
Views
24K
Spelling Error in Energy Storage Findings?
Replies
3
Views
3K
What is "Proximity Effect Control" in ebeam lithography?
Replies
1
Views
4K
Low friction/ "ductile" material?
Replies
1
Views
4K
What Material is Best for Mounting a Heavy, Non-Magnetic Apparatus?
Replies
1
Views
3K
Surface cooling - Rayleigh, Prandtl and Grashof numbers
Replies
1
Views
3K
How effective are honeycomb plates at preventing "bend"?
Replies
2
Views
4K
Why do grease, cheese, butter, jam, etc., stick to smooth surfaces?
Replies
2
Views
6K
Maximum Load on a Plastic Sheet
Replies
2
Views
5K
Carbon steel fatigue and temperature properties
Replies
3
Views
8K
Young's modulus of rubber sheet using the inflation technique
Replies
1
Views
5K
Can SRK EOS Employ NRTL Activity Coefficients?
Replies
1
Views
5K
Lever Rule: Determining Amount of Liquid & Solid
Replies
2
Views
5K
Longitudinal heat transfer material?
Replies
6
Views
7K
Is there a general equation for convection of a fin's side surface
Replies
1
Views
5K
Differences between the polymers Silicone 184 and Siloprene K1000?
Replies
1
Views
6K
Dealing with Detergents in sewage treatment plants
Replies
1
Views
4K
How to Make Large Graphene Sheets?
Replies
8
Views
9K
Plastic shredder for shredding plastic?
Replies
1
Views
6K
Can the VLE Generator accurately predict results for low reflux ratios?
Replies
6
Views
6K
Choosing the right material for milling holder adapter
Replies
1
Views
4K
Why negative Rockwell Hardness value is considered as "no good"?
Replies
6
Views
17K
Where Should I Place Sacrificial Anodes for a Tank?
Replies
2
Views
5K
UV Transparent Boiling Flask Search
Replies
11
Views
6K
Thermal Compound, calculating amount of hardener and resin by weight
Replies
2
Views
5K